|
| PTFE Nozzle Liners The non-adhesive characteristic of
PTFE retards build-up of solids. When
installed in the nozzle opening of reactors and other process equipment,
the PTFE liner can be easily cleaned without damaging fragile linings
of expensive equipment. PTFE liners are designed to reduce transmission
of vibration or shock to flange faces of such equipment and the smooth, tough
surface of PTFE minimizes the effects of erosion. Liner is designed to fit
inside Schedule 80 Pipe.
All dimensions in inches unless otherwise noted
|
| Nominal Pipe Size |
Tube Extension O.D. "A" |
Flare Dia. "B" |
Wall Thickness "C" |
| 1/2 |
17/32 |
1 3/8 |
1/16 |
| 3/4 |
45/64 |
1 11/16 |
1/16 |
| 1 |
29/32 |
2 |
1/16 |
| 1 1/2 |
1 15/32 |
2 7/8 |
1/16 |
| 2 |
1 29/32 |
3 5/8 |
1/16 |
| 3 |
2 27/32 |
5 |
5/64 |
| 4 |
3 25/32 |
6 3/16 |
3/32 |
| 6 |
5 45/64 |
8 1/2 |
7/64 |
| 8 |
7 1/2 |
10 5/8 |
5/32 |
"L" is expressed in inches with fractions of an inch in eighths, e.g.,
36", 47 1/2", 62 5/8", etc.
Length tolerance: To 36" ± 1/4", over 36" ± 1/2". |
PSI © Copyright Crane Co. All
rights reserved.
|
|
|