PTFE Mixing Tee Nozzles

Acid mixing tees are used to introduce acid to the system. The solid PTFE nozzle is specially designed to disperse the acid uniformly into the process. Various nozzle sizes are available for different outlet diameters. Optional open-ended constructions are also available. The tees are made in 1" through 8" sizes for standard and reducing tees, and are available on special request. The PTFE mixing nozzle is also used with plastic lined tees. When selecting a tee, be sure the heat of reaction does not exceed the temperature rating of the plastic liner.

Note: Mixing tee nozzles purchased separately may not always fit in an existing PSI tee, depending on size and construction. Mixing tees and nozzles should be purchased together to enable a factory fit. 

Dimensions


Detail 1
Open Ended
Detail 2
Open Ended

Detail 3                                           Detail 4
With Holes                                        With Holes

For Standard Tees
Size A B C I.D.
1 3 1/2 2 5/8 9/16 1/4
1 1/2 4 3 3/8 1 1/5 1/2
2 4 1/2 4 1/8 1 3/8 7/8
3 5 1/2 5 3/8 2 1/2 1 1/2
4 7 3/8 6 7/8 2 1/2 1 1/2
6 9 3/8 8 3/4 2 1/2 1 1/2
8 11 11 2 1/2 1 1/2
2 1/2 5 4 7/8 1 3/4 1

For Reducing Tees
Size A B C I.D.
1 1/2 x 1 4 2 5/8 9/16 1/4
2 x 1 4 1/2 2 5/8 9/16 1/4
2 x 1 1/2 4 1/2 3 3/8 1 1/8 1/2
3 x 1 5 1/2 2 5/8 9/16 1/4
3 x 1 1/2 5 1/2 3 3/8 1 1/8 1/2
3 x 2 5 1/2 4 1/8 1 3/8 7/8
4 x 1 1/2 7 3/8 3 3/8 1 1/8 1/2
4 x 2 7 3/8 4 1/8 1 3/8 7/8
4 x 3 7 3/8 5 3/8 2 1/2 1 1/2
6 x 2 9 3/8 4 1/8 1 3/8 7/8
6 x 3 9 3/8 5 3/8 2 1/2 1 1/2
6 x 4 9 3/8 6 7/8 2 1/2 1 1/2
8 x 1 11 2 5/8 9/16 1/4
8 x 1 1/2 11 2 3/8 1 1/8 1/2
8 x 2 11 4 1/8 1 3/8 7/8
8 x 4 11 6 7/8 2 1/2 1 1/2
8 x 6 11 8 3/4 2 1/2 1 1/2
4 x 1 7 3/8 2 5/8 9/16 1/4
6 x 1 1/2 9 3/8 3 3/8 1 1/8 1/2
2 1/2 x 1 5 2 5/8 9/16 1/4
2 1/2 x 1 1/2 5 3 3/8 1 1/8 1/2
2 1/2 x 2 5 4 1/8 1 3/8 7/8
6 x 1 9 3/8 2 5/8 9/16 1/4

PSI © Copyright Crane Co. All rights reserved.